
Complete workflow for a beginner running their first task on a Suirui AI computing machine
Last week I helped a friend's lab move a training task, and got stuck for an afternoon. Compute wasn't the problem; the sticking point was the stretch from power-on to being able to submit a task, which nobody had written down clearly. The delivery docs only covered how to install the cabinet, not where you should click once you sit down at the computer.
First, let me be clear about what it is. It's an entire cabinet: compute, storage, network, power, and cooling are all inside, tuned before leaving the factory, usable once powered on. In the industry it's called a POD, which you can understand as a standardized compute unit. Connect several units horizontally and you get an intelligent computing cluster.
Below is the order I got working.
1. Power on and connect cables. Confirm power is in place, liquid cooling lines are connected, and the management network port is plugged into the switch. The front panel light goes from red to green, meaning self-test passed. This step isn't your job, but you have to watch it; if you can't connect to the management console later, it's probably a problem here.
2. Log into the management console. Enter the management IP in a browser; the default account is in the delivery docs. What you get is an overview page, with the left menu roughly divided into resources, tasks, and monitoring. The first thing to do is change the password. Menu names differ across versions, so don't memorize them rigidly.
3. Create projects and allocate resources. Divide the cards among different projects by team. My first pitfall was here: to save trouble I allocated all the cards to one project, and later when others wanted to run something they had to come ask me to change it.
4. Choose an image. An image is a template disk with the system and frameworks already installed, saving you from installing drivers yourself. The key is checking whether the framework version matches your code.
5. Mount storage and transfer data. Upload the dataset to shared storage, and reference it by path in the task. Don't put it on the container's local disk.
6. Submit the task. Fill in the startup command, choose the number of cards, choose the image, mount the storage path. Once the status goes from queued to running, it's a success. How long you queue depends on how many cards others are occupying.
7. Watch monitoring. This is what I think is the most valuable part. It has built-in fault monitoring and intelligent diagnostics; storage, compute, and energy efficiency can all be viewed, and faults trigger alarms directly. I usually run quantized models and am fairly sensitive to metrics like utilization; watching three is enough.
| Metric | Normal | Check first if abnormal |
|---|---|---|
| Compute utilization | Fluctuates in a stable range | Low for a long time, probably stuck on data loading |
| Power consumption | Rises and falls with load | Power doesn't move at full load, the task may be dead |
| Temperature | Steady | Climbing, check liquid cooling first |
Three pitfalls to mention separately. One, putting data on the container's local disk means it's gone once the task restarts; always use shared storage, no exceptions. Two, running code before validating the environment; get the official demo working first, then swap in your own. Three, requesting the maximum number of cards right away; first get the process working with a small number of cards, then scale up, otherwise you'll queue until the next day.
Pros and cons together. The pros are out-of-the-box usability, short delivery cycle, standardization really saves effort for ops, and the modular design is plug-and-play. The official wording is:
Integrated with an efficient intelligent scheduling system, capable of second-level live migration.
Meaning swapping out a bad card doesn't require stopping for long, and the path for horizontal scaling is paved. The downside is that the other side of standardization is limited freedom; trying to stuff in non-standard hardware will be awkward. Liquid cooling has requirements for the machine room; you can't just put it in any random room. No matter how fast live migration is, the task itself still needs checkpoint-resume training, otherwise after migration it still has to run from the start.
My judgment is: if you want to build a proper compute center and run standard training and inference, the barrier to this thing is lower than I expected. But if your work is experimental and you change hardware configurations every day, it may not suit you.
Don't rush to scale up cards; leave the monitoring panel up for a day and see what your task's utilization curve looks like under steady state. That curve says more than any benchmark.
Physix Frontier